Amaete Kits Start building →
Scroll

Build it in 3D.
Then drive it.

Every part of your robot kit, flown into place one step at a time. Look inside it, drive it in a test room, then flash your real one from the browser.

19guided steps
4mecanum wheels
2add-ons
1tap to flash
01 · Every part

Know every piece before you pick one up.

Scroll and the whole car comes apart, each piece lifted to the floor it belongs on and named. Then the guide puts it back together one step at a time, every screw turning into its hole.

  • Parts laid out on a green cutting mat
  • Tap any part to see what it does
02 · Look inside

A cutaway, with every wire drawn in.

The car is sliced open and the decks turn see-through, so you can see how it's built. Then each wire draws itself from the part to the socket it plugs into, one at a time, with play and pause.

  • Which wire goes where, colour by colour
  • Hover a wire to light it up
03 · Drive it

Slide sideways. Drive before you build.

Mecanum wheels let the car slide sideways without turning. Try it in the simulator's test room first: dodge boxes, follow a line, follow your hand. Then drive the real one from your phone.

  • Ultrasonic eyes stop it before it bumps
  • Three sensors underneath follow a black line
04 · Add-ons

Swap the head for a camera, or an arm.

Bolt on a five-servo robot arm and pick up blocks, or swap the head for a camera and see what the car sees. Each add-on has its own steps and its own wiring.

  • Robot arm: base, shoulder, elbow, wrist, claw
  • Camera: a live view from the car
05 · Flash it

Plug in. One tap. It's alive.

The car's program flashes straight from the browser over a USB cable. No apps to install, no code to copy.

Robot Car firmware0%
  • › Plug the car into this computer
  • › Found the car's board
  • › Writing the program…
  • › Checking every byte
  • ✓ Done. The car blinks hello.

Kits

One guide per kit: build, look inside, drive, add on. More are on the way.

Robot Car

A four-wheel ESP32 car with mecanum wheels that slide sideways. Build it in eleven steps, wire it, add a camera or a robot arm, and let it drive on its own: dodge boxes, follow a line, follow your hand.

19 stepsSimulatorCamera add-onRobot arm add-onFlash from the browser
Open the guide →

Works with the QD001 smart car kit (car shield V2).

Coming next

Built the same way: every part in 3D, a simulator, real firmware.

Your car is waiting on the mat.

Start building →